Women’s Black One-Piece Swimsuit with Red HH Print (XS-3X)

Bring a bold contrast to beach days, pool plans, and resort trips with this women’s black one-piece swimsuit featuring an all-over red HH print. The smooth polyester-elastane fabric combines four-way stretch, quick-dry performance, and moisture control for flexible movement in and around the water.

The scoop neckline, low-scoop back, and cheeky-cut bottom create a sporty summer silhouette. Browse additional prints and colors in the complete Women’s One-Piece Swimsuit Collection.

Design and Fit

• Black base with an all-over red HH print
• Cheeky fit with less rear coverage than a classic-cut swimsuit
• Scoop neckline
• Low-scoop back
• Four-way stretch across crosswise and lengthwise directions
• Double-layer front for additional coverage
• Single-layer back
• Zig-zag stitching
• Available in sizes XS through 3XL

Coverage note: This is a cheeky-fit swimsuit, not a full-coverage style. No structured tummy-control panel, compression lining, built-in cups, underwire, adjustable straps, or dedicated bust-support system is specified.

Material and Construction

Material composition and fabric weight depend on the fulfillment location:

• US and Mexico fulfillment: 75% recycled polyester and 25% elastane
• Latvia fulfillment: 82% polyester and 18% elastane
• US and Mexico fabric weight: 6.64 oz/yd² / 225 g/m²
• Latvia fabric weight: 6.78 oz/yd² / 230 g/m²
• Soft-touch polyester-elastane stretch blend
• Moisture-wicking and quick-drying performance
• Printed, cut, and sewn on demand

UPF 50+ Fabric Protection

The swimsuit fabric carries a UPF 50+ rating, helping protect areas covered by the material from ultraviolet radiation. UPF protection does not cover exposed skin, so sunscreen and other appropriate sun-protection measures remain necessary.

Body Size Guide

The following chart shows recommended body measurements, not unstretched swimsuit dimensions. Keep the measuring tape level and parallel to the floor. When measurements fall between two sizes, the manufacturer recommends ordering the larger size.

How to Measure

• Chest: Measure around the fullest part of the chest, under the arms and across the shoulder blades.
• Waist: Measure around the narrowest part of the natural waist.
• Hips: Measure around the fullest part of the hips while keeping the tape level.

Flat Garment Length

One-piece swimsuit fit is also affected by torso length. The following measurements show the swimsuit length when laid flat. Measurements may vary by up to 1 inch because each garment is individually cut and sewn.

Wet-Opacity Notice

The front is double-layered, while the back uses one layer of fabric. The black base provides a darker printed appearance, but fabric opacity can change when wet. Complete wet opacity should not be guaranteed.

Swimsuit Care

Rinse the swimsuit thoroughly after every pool or ocean use to remove chlorine and salt residue. Follow the attached care label and avoid rough pool edges, abrasive surfaces, and hook-and-loop fasteners. Rough contact can pull white fibers through the printed surface and damage the swimsuit’s appearance.

Made on Demand

This swimsuit is produced after an order is placed. The fabric is printed, cut, and sewn individually, so exact placement of the red HH graphics may vary slightly from product photographs.

Prefer a blue colorway? Compare the Women’s Blue One-Piece Swimsuit with Red HH Print. For a lighter option, explore the Women’s White One-Piece Swimsuit with Red HH Print. Additional upper-body coverage is available in the Women’s Rash Guard Collection.

Frequently Asked Questions

Is this a full-coverage swimsuit?

No. This swimsuit has a cheeky-cut bottom and low-scoop back, providing less rear coverage than a classic full-coverage swimsuit.

Does the swimsuit provide tummy control?

No structured tummy-control, compression, or shaping panel is specified. The double-layer front provides additional fabric coverage but should not be described as tummy control.

Does it have built-in bust support?

No built-in cups, underwire, adjustable straps, or dedicated bust-support system is listed. Individual support requirements should be considered before ordering.

What sizes are available?

Available sizes are XS, S, M, L, XL, 2XL, and 3XL. Use the body-measurement chart and flat garment length before selecting a size.

What size should be selected when measurements fall between sizes?

The manufacturer recommends choosing the larger size when body measurements fall between two sizes.

Is this swimsuit suitable for longer torsos?

Fit depends on torso length as well as chest, waist, and hip measurements. Compare the flat garment length with a well-fitting swimsuit before ordering. No separate long-torso option is currently offered.

Is the swimsuit chlorine-resistant?

No current chlorine-resistance guarantee should be assumed. Rinse the swimsuit thoroughly after every pool use to remove chlorine residue and help protect the fabric and print.

Can the swimsuit become see-through when wet?

The front is double-layered, while the back is single-layered. Wet opacity can vary, and complete opacity should not be guaranteed.

What does UPF 50+ mean?

UPF 50+ fabric provides strong ultraviolet protection on covered areas. Exposed skin still requires sunscreen and appropriate sun protection.

Will the red HH print match the images exactly?

The black and red design remains consistent, but exact print placement may vary slightly because each swimsuit is individually printed, cut, and sewn.